Formas de producir electricidad
Hay seis maneras de producir lo que damos en llamar electricidad.
Por reacción química
La reacción química entre dos metales genera energía.
Uno de los procesos para producir energía es mediante la reacción química entre dos metales en un medio ácido o alcalino.
Un dispositivo capaz de producir electricidad a través de la reacción química es la pila.
La pila genera corriente eléctrica continua y se basa en la acción química de un electrolítico sobre los electrodos del mismo ion.
- Tomar dos metales distintos (por ej. cobre y zinc)
- Unirlos con cable a un reloj, o un galvanómetro, e insertarlos en una papa o limón (o sumergirlos en un recipiente con agua acidulada)
- Comprobarás que el galvanómetro acusará paso de corriente eléctrica o, en su caso, el reloj comenzará a funcionar.
Por magnetismo
Los conductores generan en ellos mismos una corriente al moverse en un campo magnético.
Uno de los procesos para producir energía es mediante el movimiento de un imán frente a un bobinado de cobre, o bien por el movimiento de un bobinado frente a un campo magnético.
Una máquina destinada a transformar la energía mecánica en eléctrica es el dinamo. Da lugar a una corriente unidireccional y está basada en la propiedad enunciada precedentemente.
Comprobación
Por ejemplo, si golpeamos la membrana de un parlaste estamos moviendo una bobina de cobre a lo largo del imán, y si en los bornes del parlante conectamos un voltímetro, este acusará corriente eléctrica.
Otro ejemplo seria unir los cables de un pequeño motor a otro motor de igual característica. Al hacer girar uno con la mano estamos moviendo una bobina en medio de dos imanes; esto produce electricidad que, al pasar por los cables, crea en la bobina del otro motor un campo magnético que lo hace girar por repelerse con el imán.
Por frotamiento
Las primeras evidencias de las fuerzas eléctricas se observaron al frotar con paños ciertos cuerpos.
Una forma de producir energía es mediante el frotamiento de dos sustancias.
Si frotamos un trozo de plástico con una franela y la acercamos a unas esferitas de telgopor veremos que éstas se adhieren pero luego de un rato se desprenden.
Ocurrió que al adherirse las cargas eléctricas eran distintas, pero al producirse el intercambio de electrones se neutralizaron y comenzaron a rechazarse.
Comprobación
- Frota fuertemente, varias veces, una lapicera de plástico con un paño de lana.
- Luego colócala sobre pedacitos de papel.
- Comprobarás que la lapicera los levanta porque ejerce sobre ellos una fuerza electromagnética.
Por presión o golpe
El choque de dos elementos genera energía
Uno de los procesos para producir energía es mediante la presión o golpe entre dos elementos.
Si raspamos un metal contra un objeto saltan chispas o sea: hay una manifestación de energía. Si golpeamos un clavo también ocurre lo mismo.
A su vez, si queremos chispas más grandes las podemos encontrar en dos piezocerámicos al golpearse (como en el caso del encendedor Magiclick).
Comprobación
- Toma un martillo y un clavo.
- Luego golpear el clavo de refilón, desplazándose.
- Esto te permitirá ver las chispas (o sea escape de electrones) que se producen.
Por temperatura
La unión de dos elementos por soldadura o remache proporciona electricidad al calentarse.
Un modo de obtener energía es mediante la producción de calor.
Si calentamos la unión de dos metales remachados, soldados o atornillados los extremos libres manifestaran carga eléctrica.
Estos metales distintos soldados se conocen con el nombre de termocupla y sirven para las válvulas de seguridad de estufas, cocinas y calefones a gas.
Comprobación
- Soldar dos elementos.
- Conectarlos a un vúmetro (voltímetro, galvanómetro) y acercarle una fuente de calor.
- Observar si la aguja se mueve.
En la foto vemos una termocupla, una fuente de calor y un galvanómetro para registrar la corriente eléctrica que se produce con la temperatura.
Por luz o iluminación
La incidencia de luz genera energía.
Un modo de obtener energía es mediante la aplicación de luz en una célula fotoeléctrica.
La célula fotoeléctrica es un aparato consistente en un circuito, en el cual va intercalada una superficie de metal alcalino montada de manera especial, que es capaz de generar (como su nombre lo indica) electricidad en presencia de luz.
INGLES
Ways to produce electricity
There are six ways to produce what we call electricity.
By chemical reaction
The chemical reaction between two metals generates energy.
One of the processes for producing energy is through the chemical reaction between two metals in an acidic or alkaline environment.
A device capable of producing electricity through the chemical reaction is the heap.
The battery generates continuous electric current and is based on the chemical action of an electrolytic on the electrodes of the same ion.
Take two different metals (eg copper and zinc)
Wiring them to a clock or a galvanometer and inserting them into a potato or lemon (or immersing them in a container with acidic water)
You will check that the galvanometer will indicate an electric current or, if necessary, the watch will start to operate.
By magnetism
The conductors generate in themselves a current when moving in a magnetic field.
One of the processes for producing energy is by the movement of a magnet in front of a copper winding, or by the movement of a winding against a magnetic field.
A machine designed to transform mechanical energy into electric is the dynamo. It gives rise to a unidirectional current and is based on the property stated above.
Testing
For example, if we hit the membrane of a paralaste we are moving a coil of copper along the magnet, and if at the terminals of the speaker we connect a voltmeter, it will charge electric current.
Another example would be to connect the wires of a small motor to another motor of the same characteristic. When we spin one by hand we are moving a coil in the middle of two magnets; This produces electricity that, when passing through the cables, creates in the coil of the other motor a magnetic field that makes it spin by repelling with the magnet.
By friction
The first evidence of electrical forces was observed when rubbing certain bodies with cloths.
One way to produce energy is by rubbing two substances.
If we rub a piece of plastic with a flannel and we approach a few spheres of telgopor we will see that they stick together but after a while they come off.
It happened that when bonding the electric charges were different, but when the exchange of electrons occurred they were neutralized and began to be rejected.
Testing
Rub a plastic pen with a woolen cloth several times.
Then place it on small pieces of paper.
You will see that the pen lifts them because it exerts an electromagnetic force on them.
By pressure or blow
The clash of two elements generates energy
One of the processes for producing energy is by pressure or stroke between two elements.
If we scrape a metal against an object sparks jump that is: there is a manifestation of energy. If we hit a nail, the same thing happens.
In turn, if we want bigger sparks can be found in two piezocerámicos when beating (as in the case of the Magiclick lighter).
Testing
Take a hammer and a nail.
Then strike the refill nail, moving.
This will allow you to see the sparks (or escape of electrons) that occur.
By temperature
The union of two elements by welding or riveting provides electricity upon heating.
One way to obtain energy is by producing heat.
If we heat the union of two riveted, welded or screwed metals the free ends will manifest electric charge.
These different welding metals are known as thermocouple and serve for safety valves for stoves, kitchens and gas heaters.
Testing
Welding of the elements.
Connect them to a meter (voltmeter, galvanometer) and bring it to a heat source.
Observe if the needle moves.
In the photo we see a thermocouple, a heat source and a galvanometer to record the electric current that is produced with the temperature.
By light or illumination
The incidence of light generates energy.
One way to obtain energy is by applying light to a photoelectric cell.
The photoelectric cell is an apparatus consisting of a circuit, in which is inserted an especially mounted alkali metal surface, which is capable of generating (as its name implies) electricity in the presence of light.
No hay comentarios.:
Publicar un comentario